This blog is moved to Samiux’s Blog.

It works with PHP and MySQL. Therefore, the LAMP (Linux, Apache, MySQL and PHP) should be renamed to LHMP (Linux, Hiawatha, MySQL and PHP).

Step 0 :

Install Ubuntu 9.04 Server and OpenSSH as usual. Make sure to perform the following.

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade

Step 1 :

Download Hiawatha, the current version at this writing is 6.16, at http://www.hiawatha-webserver.org/download.

sudo wget http://www.hiawatha-webserver.org/files/hiawatha-6.16.tar.gz
tar -xzvf hiawatha-6.16.tar.gz
cd hiawatha-6.16

Configure and compile the Hiawatha.

sudo apt-get install build-essentail libc6-dev libssl-dev dpkg-dev debhelper fakeroot libxml2-dev libxslt1-dev

sudo ./configure
sudo make deb

The deb package will be created at /home/samiux. You can install it by :

sudo dpkg -i hiawatha_6.16_amd64.deb

or

sudo dpkg -i hiawatha_6.16_i386.deb

Step 2 :

Install mysql and php5.

sudo apt-get install mysql-server mysql-client php5-cgi php5 php5-cli php5-mysql php5-curl php5-gd php5-idn php-pear php5-imagick php5-imap php5-mcrypt php5-memcache php5-mhash php5-ming php5-ps php5-pspell php5-recode php5-snmp php5-sqlite php5-tidy php5-xmlrpc php5-xsl

Enter the password for the MySQL and write it down for further usage.

Step 3 :

sudo nano /etc/hiawatha/php-fcgi.conf

Uncomment the following line :

Server = /usr/bin/php5-cgi ; 127.0.0.1:2005 ; www-data

Activate php-fcgi.

sudo php-fcgi -c /etc/hiawatha/php-fcgi.conf

Kill it with -k, such as :

sudo php-fcgi -k -c /etc/hiawatha/php-fcgi.conf

*Make sure you have been activated php-fcgi; otherwise, php5 cannot be run.

Step 4 :

sudo nano /etc/hiawatha/hiawatha.conf

Uncomment ServerId at GENERAL SETTINGS.

ServerId = www-data

Uncomment the following entries at BINDING SETTINGS.

Binding {
   Port = 80
   MaxKeepAlive = 30
   TimeForRequest = 3,20
}

Uncomment all the entries at BANNING SETTINGS.

BanOnGarbage = 300
BanOnMaxPerIP = 60
BanOnMaxReqSize = 300
KickOnBan = yes
RebanDuringBan = yes
BanOnSQLi = 0
BanOnFlooding = 10/1:15
BanlistMask = allow 192.168.0.0/24


Uncomment all the entries at COMMON GATEWAY INTERFACE (CGI) SETTINGS.

CGIhandler = /usr/hin/perl:pl
CGIhandler = /usr/bin/php5-cgi:php,php5
CGIhandler = /usr/bin/python:py
CGIhandler = /usr/bin/ruby:rb
CGIhandler = /usr/bin/ssi-cgi:shtml
GCIextension = cgi

Uncomment all the entries of FastCGIserver and rename ConnectTo to 127.0.0.1:2005.

FastCGIserver {
   FastCGIid = PHP5
   ConnectTo = 127.0.0.1:2005
   Extension = php, php5
   SessionTimeout = 30
}

Uncomment all the entries of URL TOOLKIT.

UrlToolkit {
   ToolkitID = banshee
   RequestURI isfile Return
   Match ^/(favicon.ico|robots.txt|sitemap.xml)$ Return
   Match .*\?(.*) Rewrite /index.php?$1
   Match .* Rewrite /index.php
}

Uncomment all the entries of VIRTUAL HOSTS and alert it when necessary.

VirtualHost {
   Hostname = www.samiux.com
   WebsiteRoot = /var/www/www.samiux.com
   StartFile = index.php
   AccessLogfile = /var/log/hiawatha/access.log
   ErrorLogfile = /var/log/hiawatha/error.log
   TimeForGCI = 5
   UseFastCGI = PHP5
   UseToolkit = banshee
   PreventCSRF = yes
   PreventSQLi = yes
   PreventXSS = yes
}

Assumed that your domain name is samiux.com and the site is at /var/www/www.samiux.com.

Step 5 :

sudo nano /etc/php5/cgi/php.ini

Change the following line to Off.

allow_url_fopen = Off

Step 6 :

Restart the Hiawatha.

sudo /etc/init.d/hiawatha restart

Step 7 :

Use AppArmor with Hiawatha.

sudo aa-genprof hiawatha

sudo nano /etc/apparmor.d/usr.sbin.hiawatha

Add the following lines.

#include <tunables/global>
/usr/sbin/hiawatha {
   #include <abstractions/base>
   capability chown,
   capability dac_override,
   capability net_bind_service,
   capability setgid,
   capability setuid,
   capability sys_chroot,
   network inet tcp,
   /etc/group r,
   /etc/hiawatha/** r,
   /etc/nsswitch.conf r,
   /etc/passwd r,
   /usr/bin/php5-cgi rix,
   /usr/sbin/cgi-wrapper mr,
   /usr/sbin/hiawatha mr,
   /usr/share/dbconfig-common/** r,
   /usr/share/phpmyadmin/ r,
   /usr/share/phpmyadmin/** r,
   /var/lib/** r,
   /var/lib/hiawatha/* rw,
   /var/log/hiawatha/ r,
   /var/log/hiawatha/** rw,
   /var/run/hiawatha.pid w,
   /var/www/ r,
   /var/www/** rw,
   /home/*/public_html/** r,
}

Make it enforce.

sudo aa-enforce hiawatha

That’s all. See you!

sudo apt-get install checkinstall

Download the source file, such as foo.tar.gz and extract it.

wget http://www.foo.com/downloads/foo.tar.gz

tar -xzvf foo.tar.gz
cd foo

./configure
make
sudo checkinstall

After that, the package will be installed automatically and a deb is also generated. You can uninstall package as usual.

For checkinstall usage, please man it.

Therefore, I write the following shell script for the captioned purpose which will delete all the files at /var/log and its subdirectories that are existing more than 30 days.

You can change the existing days by altering the value at DAYEXIST.

Step 1 :

nano /home/samiux/cleanup

————- CUT HERE —————–
#!/bin/bash

LOGDIR=”/var/log”
DAYEXIST=”30″

find $LOGDIR -type f -mtime +$DAYEXIST -exec rm {} \;

exit 0
————- CUT HERE —————–

sudo chmod +x /home/samiux/cleanup

Step 2 :

Perform the task at 0130 hours every day.

sudo crontab -e

30 1 * * * /home/samiux/cleanup 2 >&1

Step 3 :

WARNING : DO IT AT YOUR RISK

** Your comment is welcome when my concept is wrong, thanks **

Enjoy!

Assumed that your server IP is 192.168.50.100 and you want to specify a port range 50000-50100 for the passive mode.

Step 1 :

sudo nano /etc/pure-ftpd/conf/PassivePortRange
50000 50100

sudo nano /etc/pure-ftpd/conf/ForcePassiveIP
192.168.50.100

Step 2 :

Restart the service.

sudo /etc/init.d/pure-ftpd restart

That’s all!

Step 1 :

Download the package at here and the current version is 3.17-3 by this writing.

Install the package and configure the package as usual.

sudo dpkg -i <package_name>

Step 2 :

Edit /etc/fstab and add “usrquota,grpquota” on the partition with the mount point /.

sudo touch /quota.user /quota.group
sudo chmod 600 /quota.*
sudo mount -o remount /

Step 3 :

sudo quotacheck -avugm
sudo quotaon -avug

That’s all. See you!

Bittorrent server front-end is using Torrentflux-b4rt. It is running on PHP and MySQL with bittornado.

Step 0 :

Install Ubuntu 9.04 Server edition as usual. Select OpenSSH only when install.

After the installation, perform the system update.

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade

Assume your server’s IP is 192.168.0.200

Step 1 :

sudo nano /etc/apt/sources.list.d/cherokee.list

Add the following lines.

deb http://ppa.launchpad.net/cherokee-webserver/ppa/ubuntu jaunty main
deb-src http://ppa.launchpad.net/cherokee-webserver/ppa/ubuntu jaunty main

Add the key.

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys EBA7BD49

sudo apt-get update
sudo apt-get install cherokee

Step 2 :

sudo apt-get install mysql-server mysql-client

Enter the MySQL root password when asked. Make sure you have write it down.

Step 3 :

sudo apt-get install php5-cgi

sudo nano /etc/php5/cgi/php.ini

Append the following line at the end of the file.

cgi.fix_pathinfo = 1

sudo /etc/init.d/cherokee restart

sudo apt-get install php5 php5-cli php5-mysql php5-curl php5-gd php5-idn php-pear php5-imagick php5-imap php5-mcrypt php5-memcache php5-mhash php5-ming php5-ps php5-pspell php5-recode php5-snmp php5-sqlite php5-tidy php5-xmlrpc php5-xsl

sudo /etc/init.d/cherokee restart

Step 4 :

sudo cherokee-admin -b

The following will be displayed.

Login:
User: admin
One-time Password: W0K2jR961aYaeiwu

Web Interface:
URL: http://localhost:9090/

Cherokee Web Server 0.99.22 (Aug 5 2009): Listening on port ALL:9090, TLS disabled, IPv6 disabled, using epoll, 4096 fds system limit, max. 2041 connections, caching I/O, single thread

Open browser and point to http://192.168.0.200:9090 or http://localhost:9090

Enter the user name as “admin” and password as “W0K2jR961aYaeiwu” (which will be changed each time).

Step 5 :

Clone a virtual host from default. Add the domain name, document root and etc.

The document root should be “/var/www/torrentflux”.

Go back to the terminal and press Ctrl + C to quit the Cherokee’s admin page.

sudo /etc/init.d/cherokee restart

Step 6 :

sudo apt-get install unrar unzip vlc uudeview build-essential bittornado

Download and compile cksfv that is required by torrentflux-b4rt.

wget http://zakalwe.fi/~shd/foss/cksfv/files/cksfv-1.3.14.tar.bz2
tar -xjvf cksfv-1.3.14.tar.bz2

cd cksfv-1.3.14
./configure
make
sudo make install

Get and install torrentflux-b4rt.

wget http://download.berlios.de/tf-b4rt/torrentflux-b4rt_1.0-beta2.tar.bz2
tar -xjvf torrentflux-b4rt_1.0-beta2.tar.bz2

cd torrentflux-b4rt_1.0-beta2
sudo cp -R html /var/www/torrentflux
sudo chmod -R 0777 /var/www/torrentflux/inc/config

sudo mkdir /home/samiux/torrent
sudo chmod -R 0777 /home/samiux/torrent

Step 7 :

Point your browser to http://192.168.0.200/setup.php and configure it.

** You keyin the username and password on the torrentflux-b4rt will be recorded for the admin account. Please write it down.

The download directory should be “/home/samiux/torrent”.

After the configuration, delete the setup.php.

sudo rm /var/www/torrentflux/setup.php

Step 8 :

Make sure to forward the default ports 49160 to 49300 at your router or firewall.

Step 9 (Optional) :

Install vsftpd when necessary.

** Make sure you change the IP address at “pasv_address”.

Step 10 (Optional) :

Make your server bootless.

Enjoy!

sudo make-ssl-cert generate -default-snakeoil --force-overwrite

When you forgot the root password of MySQL, you can reset it by issue the following command under Ubuntu 9.04.

sudo dpkg-reconfigure mysql-server-5.0

The following is the setting of “My Perfect Home Network 2009 (Version 4.0)”. Virtualization technology can reduce the number of servers you owned. It saves room, electricity and money as well as manpower to manage. Therefore, it has one more term – Green Computing.

Configuration of KVM Server
2 x Intel Xeon E5420 Quad-Core CPU
16GB ECC DDR2 RAM
6 x 1TB Hard drive on hardware RAID 5EE

KVM Server
Virtualization Server (that runs the following 5 servers)
Proxmox on Debian 5.01 Lenny

Server #0
Running Untangle inside.

Server #1
Almost perfect and secure Ubuntu 9.04 LAMP Server

Server #2
WebDAV on Ubuntu 9.04 Server

Server #3
Sockso (Music Server) on Ubuntu 9.04 Server

Server #4
ntop on Ubuntu 9.04 Server

Server #5
Torrentflux-b4rt with Cherokee on Ubuntu 9.04 Server

**********

Router to router
Connecting wired router to wireless router

**********

Evolution of my network 2007-2009

2007 – a very simple network with a wired and a wireless router

2008

2009 (Version 3.4)

2009 (Version 4.0) *This writing* – It is finally simplified into one server with the help of modern computing technology!

Step 1 :

sudo nano /etc/udev/rules.d/70-persistent-net.rules

Edit the MAC address and/or name of the interface when necessary.

Step 2 :

sudo nano /etc/network/interfaces

Add a new entry for the new interface accordingly.

auto eth2
iface eth2 inet dhcp

*dhcp if IP is assigned automatically by DHCP

Step 3 :

sudo ifconfig ethX up

sudo /etc/init.d/networking restart

*where ethX will be eth0, eth1, eth2 ….