Router to router

I have a wired and a wireless routers. I connect them together to make them looking as one router. Then, I can access all the computers within the same intranet.

Router A (connect to the internet)
Step 1 :
I assigned a wired router to be Router A which is connected to the internet via optical fiber. I did nothing on the Router A. The LAN IP is 192.168.0.1.

Router B (connect to the Router A)
Step 2 :
I assigned a wireless router to be Router B and I should change the settings of it.

WAN
Set the WAN IP to be static 192.168.111.2, subnet mask 255.255.255.0 and gateway 192.168.111.1, no matter your Router B is wired or wireless. For me, Router B is a wireless. (You can change the WAN IP and gateway to meet your requirement, here is only an example)

LAN :
Disabled DHCP and set the LAN IP to 192.168.0.200, subnet mask 255.255.255.0, no matter your Router B is wired or wireless. (You can change the LAN IP to meet your requirement, here is only an example)

Step 3 :
Connect Router A and Router B via a cable on LAN ports only. WAN port will not be used at the Router B. Connect Router A to the internet as normal. Now, you can access Router A by 192.168.0.1 and Router B by 192.168.0.200 via your browser. Any computer or laptop will be assigned an IP of 192.168.0.XXX.

That’s all. Enjoy networking!

Advertisements

2 Responses

  1. […] Router to router Connecting wired router to wireless router […]

  2. […] Router to router Connecting wired router to wireless router […]

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: